5th Oct 2018 7:00 am
Electric hatchback concept to compete with the BMW i3 and Volkswagen ID when it goes on sale in international markets in 2020.
The entry point to Mercedes’ EQ electric car sub-brand, the EQA hatchback, was displayed at the Paris motor show. The concept was earlier unveiled at the 2017 Frankfurt motor show and is set to go into production in 2020. It will be built at Mercedes-Benz’s plant in Hambach, France, where the electric smart models are currently made.
The EQA electric hatchback will join the larger EQC, which was previewed in concept form at the 2016 Paris motor show. Set to offer a 400-km range and be priced to directly rival the BMW i3, the EQA will be part of a 10-car EQ line-up due in showrooms by 2022.
Mercedes boss Dieter Zetsche said: “The EQ line-up will cover different vehicles and one of them will be a compact car.” Mercedes is pushing to enhance the productivity of its global plant network, with the Hambach site becoming specialised in EVs, helping the brand up its EV production numbers without affecting supply for petrol and diesel models.
Zetsche said last year that Mercedes’s push for electrification is “gathering pace” and that “the EQA proves that we’re serious about introducing electric mobility throughout the portfolio”.
The starting point for the EQA is a new electric vehicle platform developed by Mercedes for use in all upcoming EQ models. Known internally by the codename EVA (electric vehicle architecture), it has been conceived to allow the new model to be built alongside Mercedes’ conventional compact car models in the same factories that produce the A-class, B-class, CLA, CLA Shooting Brake and GLA.
The flexible platform is planned to support either front-, rear- or four-wheel drive, with either one or two electric motors and a scalable battery mounted low down within its flat floor structure, operating on an 800V electrical system that can provide rapid charging.
Predictably, the smallest of Mercedes’ EQ models follows the same stylistic path taken by the EQC, with conventional proportions and smooth surfacing in a treatment Mercedes describes as its electric aesthetic. A long wheelbase helps provide the new concept with short overhangs, while a combination of wide tracks and 20-inch wheels in a double-spoke optic provide a suitably sporting stance.
While the EQA has a three-door layout in concept car guise, insiders suggest the production version will have a five-door hatchback layout, with accommodation for up to five people in an interior they say is “considerably larger” than that of the A-class, owing to the packaging advantages provided by its electric driveline.
As with the EQC, an illuminated black panel incorporating distinctively styled laser-fibre headlights is used up front, ensuring the Concept EQA instantly stands out from the existing range of compact Mercedes models.
The high-tech front end also acts as a virtual radiator grille. It is programmed to alter the appearance of the new car dependent on the driving mode. In Sport, it depicts what Mercedes describes as a flaming horizontal wing, with a blue hue extending out from an oversized three-pointed star emblem. In Sport Plus, the black panel changes its look to mimic the shape of the Panamericana grille of AMG models, complete with vertical louvres.
A similar black panel treatment is used at the rear, where it visually extends the depth of the rear window and serves to house the Concept EQA’s full-width OLED tail-lights.
The blue hue of the grille is mirrored in a series of LED lights within the outer and lower sections of the front bumper, the side sills and rear bumper.
Conceptual in nature, the Concept EQA has a smooth aero-cheating look, including the loss of the windscreen wipers, the adoption of a remote opening function in place of conventional door handles and a darkened glass roof.
“With the Concept EQA, we have reinterpreted our design philosophy. We eliminated creases and lines. It is a bold statement for our EQ brand,” said Mercedes chief design officer Gorden Wagener.
At 4,285mm in length, 1,810mm in width and 1,428mm in height, the EQA is a scant 14mm shorter, 30mm wider and 6mm lower than the existing third-generation A-class. It also uses a wheelbase that is 30mm longer than the entry-level Mercedes model at 2,729mm.
Power for the second EQ concept car hails from a developmental driveline being readied for a range of EQ models. It uses two electric motors – one mounted up front underneath the bonnet and the other integrated within the rear axle assembly. The set-up, similar to that showcased on the EQC, delivers a combined 272hp and more than 500Nm of torque for a claimed 0-100kph time of “around 5.0sec”.
With a four-wheel-drive system supporting variable torque distribution between the front and rear axles, and a battery pack mounted low down within the floor structure, Mercedes is already talking up the dynamic qualities of the upcoming production car, which it hints will offer different driving modes. In the Concept EQA, the driver can choose between Sport and Sport Plus to vary the torque distribution front to rear.
The EQA has been conceived to run a 60kWh lithium-ion battery to be produced by Mercedes sister company Accumotive. It is claimed to endow the entry-level electric car with an overall range of “around 400km” and can be charged either via traditional plug-in or induction means; officials claim that 10 minutes of charging is sufficient to produce an added 100km of range on a high-voltage system.
Mercedes claims its investment in US charging station provider, ChargePoint, will benefit its plans to roll out a range of EQ-branded models by allowing it to offer more charging solutions. At the unveiling of the Concept EQA, Mercedes announced plans to expand ChargePoint’s operations to Europe as part of efforts to expand the existing charging infrastructure.